Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG

Mammut Shell Catcher

Never Let Your Spent Casings Go Astray Again - 

Keep Them Tidy, Safe, and Ready to Reuse


$39.99
$39.99
1 Set (Shipping Cost: $3.99)2 Sets ($34.99/set + FreeShipping)3 Sets ($29.99/set + FreeShipping)

Discount is available for a limited time only!

  • No More Time Wasted: Do you ever feel like you spend more time searching for your brass than actually shooting? With the Mammut Shell Catcher, you can eliminate the need for scavenging and focus on what really matters: shooting! 
  • Easy to Install and Use: It comes with a high-density soft nylon hook and loop band that makes installation quick and easy. 

  • Designed to fit a wide range of firearms, so you don't have to worry about compatibility issues.

  • Extremely Durable: The Mammut Shell Catcher is built to last. It's made from heat-resistant mesh and metal frame that deliver a durable using experience. 
  • Adjustable: You can move the catcher closer or further away from the receiver, depending on the cartridge length. This means that you can customize the catcher to fit your specific firearm and shooting needs.
  • Ideal for Reloaders: Compatible with most models and can hold up to 100 rounds of empty .223 brass.

Don't Be a Loser: 

Get the Mammut Shell Catcher and Keep Your Brass Close

- Picture this: you're at the range, having a grand old time, blasting away at your targets with your trusty firearm. But there's just one problem: you keep losing your brass. Every time you shoot, it goes flying off in all directions, never to be seen again. You're crawling around on the ground like a madman, searching for those precious casings, but they're nowhere to be found. And to make matters worse, you're starting to get some seriously brass-induced rage fits.


- Well, my friend, it's time to put an end to all that nonsense. It's time to invest in the Mammut Shell Catcher.


- This bad boy is the ultimate solution for all your brass-related woes. Made from high-quality nylon mesh and featuring a 45-degree right-side wire frame, the Mammut Shell Catcher is designed to catch every single piece of brass that comes flying out of your firearm. No more lost casings. No more crawling around on the ground like a maniac. Just smooth, seamless shooting, every single time.

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

Heat-resistant & 

Easy Installation

- But that's not all. The Mammut Shell Catcher is also heat-resistant, so you don't have to worry about it melting or warping due to high temperatures. And the light-padded design on both the front and back of the catcher allows proper airflow to pass through, ensuring that your firearm stays cool and comfortable even during prolonged shooting sessions.


- Installation is a breeze, thanks to the high-density soft nylon hook and loop band. Just wrap it around your rifle barrel, and you're good to go. And if you ever need to remove the catcher to address jams or cleaning issues, the light-weight shell allows for easy object retention and removal.

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

An excellent tool for keeping your brass casings contained and easy to retrieve

- But perhaps the best thing about the Mammut Shell Catcher is that it's adjustable. With four different settings to choose from, you can control the distance between your firearm and the catcher, ensuring that it's perfectly positioned for your needs. And if you need to make additional adjustments, the detachable Picatinny rail mount makes it a snap to do so.


- And let's not forget about the bottom zipper. This convenient feature makes it easy to transport your spent brass casings, whether you're heading home from the range or taking them to the reloading bench. And with a capacity of up to 100 rounds of empty .223 brass, the Mammut Shell Catcher is ideal for reloaders who want to save their casings for future use.


- So what are you waiting for? Don't be a loser. Get the Mammut Shell Catcher today and keep your brass close. Your shooting sessions (and your blood pressure) will thank you.

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

left hand shoulder holster, shoulder gun holster, belly holster, right hand shoulder holster

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

120 DAYS REPLACEMENT GUARANTEED

  • At Dinosaurized, we believe our products are truly innovative and have 100% confidence in it.

  • We understand that buying things online can be scary with companies not staying true to their customers 


    So we go the extend to keep you satisfied.

  • We are happy to offer you a 120 day replacement guarantee with your purchase.

  • Please contact us firstly at support@dinosaurized.com and get your new 

    product  if you meet any quality issues within 120 days.

  • 100% Simple & Risk-Free process.

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

WHAT OUR CUSTOMERS SAY?

⭐⭐⭐⭐⭐
shoulder holster review, shoulder holster for men, shoulder holster for fat guy, right hand shoulder holster

"Fits tight up against ejection port of rifle like it should. Sticks out further than most and that helps to not have ejection issues that I found common with other brass catchers. The absolute best thing about it is that it zips at bottom so it's really easy to get brass out. I would recommend this for anyone who reloads or shoots where they have to pick up brass its does the job just as good as more expensive ones. Shipping was fast and arrived on time. I have yet to find a bad thing to say about it"

- Ash T, Casa Grande, Arizona

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

shoulder holster review, shoulder holster for men, shoulder holster for fat guy, right hand shoulder holster

"An excellent product with a great price. Fit is very good and works as advertised. The only adjustment I made was to make a slight bend to make the rear of the catcher fit flush with the back of my ejection port/receiver. Two seconds and it works perfectly. Fits flat into the cargo area of my AR case and it is with me everywhere I go. I actually like this better than other model with a picatinny mount. This simply works better in every category. Great product!"

- Billy T.Pinal County, Arizona 

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

vertical shoulder holster, gun shoulder holster, tactical shoulder holster

"Arrived ahead of schedule, which is always nice. Really nice shell holder/brass catcher. Just make sure you get the velcro strap as tight as you can around the hand guard to keep it from rotating and moving the baskey away from the left side [ejection port] of the upper receiver. Love the zipper on the bottom of the bag. Makes it so easy to empty the bag."

C. Humberto, Springfield, Illinois

vertical shoulder holster, gun shoulder holster, tactical shoulder holster

"I was tired of picking my brass off the dirty ground. And sometimes having to look for it underneath leaves and other debris. Since my brother does all my reloads the shells are clean. Every time I reload clip just have to make sure that the catcher is in the right position which is no problem. Great value , easy to use and was shipped fast."

Phillip Fisk, Kaysville, Utah

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐

Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG
Mammut Shell Catcher GG

Mammut Shell Catcher


$39.99
$39.99
1 Set (Shipping Cost: $3.99)2 Sets ($34.99/set + FreeShipping)3 Sets ($29.99/set + FreeShipping)

Discount is available for a limited time only!

FREQUENTLY ASK QUESTION

Shipping time?

- (U.S customers only) Standard shipping time is 2-10 Calendar days to ship and arrive. (Shipped from U.S, by USPS)

All packages are seriously & strictly sterilized before being sent.

- For Non-US customers, shipping time may vary from 10-20 Business days. 

- We'll immediately upload your tracking code to your email after the shipment, it may take 1-4 days to be activated.   

Will this work on an M4?

- Yes

Will this work on my Ruger Mini14?

- Yes

Do this work on a 9mm fmk

- No

Will it fit on a ak47?

- Yes

I purchased your shell catcher to use on my AK47. Do you have any special advice or instructions for me?

I purchased your shell catcher to use on my AK47. Do you have any special advice or instructions for me?

My son needs a shell catcher for his 20 gauge automatic for trap. Is this what I need? Or what would you recommend?

- I think 20 gauge automatic won't fit it.I check if the 20 gauge automatic has a M-Lok system.I suggest you buy a shell catcher with M-Lok System Adapter.

Will it fit a Full size Draco??

- No

Can I use this on 22magnum long rifle ?

- No

Will this work on a h i - point 995?

- Yes

Will this work on a M-1 carbine ?

- No

Will it fit ar15?

- Yes

Will it fit a pistol with the bag facing up towards the barrel shell release?

- No

Will it fit a top ejecting level action rifle?

- Probably not the best of ideas for a couple of reasons. 1 you won't be able to use the sights, 2 you will have to put the bag either on the right or the left, so you're probably going to have it throwing brass back into the action rather than into the bag.

Will this work on a .308 bolt action rifle?

- It all depends on your rifle. It covers the bolt opening on my Mossberg Precision 6.5 CM, but you have to bend the metal on the back of it to make sure it does not interfere with the bolt moving all the way to the front.

Will this fit 4095 carbine?

- It should

Will it fit on a 300 blackout with AR-15 lower?

- Yes

Will this work on a Sub2000?

- it will be a little loose

Will this fit on a Kel-Tec Sub-2000?

- Yes

Will this work on a left hand AR-15?

- Yes

Will this work on a glock 22

- No

Does it fit. AR-10 in .308 / 7.62x51 cal

- Yes

Will it fit an AR10?

- Yes

100% No-Risk Replacement Guarantee

⭐⭐⭐⭐⭐